Interturbine Technologies GmbH provides the full range of services to meet customer's demand for seat track repairs:

• raw material sections cut to requested length
• machining of mounting seat holes (notches) according to the Airbus structural repair manual (SRM) or customer specification
• surface treatment (anodizing & painting) of final machined seat track segment
• delivery of prepared seat tracks including seat track cover if required
  

Raw Material Extrusion		Seat Track Segment Semi-finished (SFS-D)		Seat Track Segment Semi-finished (SFS-DAP)
T-Profile Aluminium		Extrusion including: - Drilling / milling notches    according to SRM		Extrusion including: - Drilling notches - Anodizing surface - Painting surface according to SRM
Raw Mat. No.	ITL No.	ITL Description	ITL No.	ITL Description	ITL No.	Aircraft type
A53274005	108590	A53274005 SFS-D	125141	A53274005 SFS-DAP	172563	A300/310/ 330/340
ABS5080A536	154174	ABS5080A536 SFS-D	168808	ABS5080A536 SFS-DAP	173210	A330/340
ASNA2506	118119	ASNA2506 SFS-D	168804	ASNA2506 SFS-DAP	173211	A330/340
ASNA2566	129610	ASNA2566 SFS-D	125368	ASNA2566 SFS-DAP	173401	A330/340
ASNA2473	117109	ASNA2473 SFS-D	173213	ASNA2473 SFS-DAP	134849	A330/340
ASNA2223	105478	ASNA2223 SFS-D	173215	ASNA2223 SFS-DAP	134850	A320/321
D53070011	105826	D53070011 SFS-D	173215	D53070011 SFS-DAP	134852	A320/321
NTA 44768	12873	NTA 44768 SFS-D	167867			ATR42/72
BAC1520-1055	111172	BAC1520-1055 and	111172			BC-767
BAC1520-1545	128861	Drilling Service	133746			BC-767

* Length 6.0 meter, customized length available on request

SFS-DAP: (SFS) semi-finished seat track segment, including

• (D) Drilled seat mounting holes (notches)
• (A) Anodized complete surfaces
• (P) Painted complete surfaces

Customer Benefits:

• Savings in costs through cut-out process in accordance with the Airbus SRM
• No scrap, customized lengths of semi-finished seat tracks to individual requirements
• No minimum order quantity, supply the lengths as needed
• Savings in cost and time for internal machining and surface treatment
• Savings in storage space as it reduces the need to hold large stocks
• Savings in purchasing of raw material
• Reduced lead times / reduced aircraft maintenance turn-around time
• Full AOG support for finished or semi-finished repair spares
• Full support for aircraft with Heavy Maintenance through Interturbine's network of regional warehouses

Consumable materials for cut-out edges area are available on request:

Surface pre-treatment:  Wash primer: Primer: Top coat grey: Sealant brush:	Alodine-1200 Article no. 121980 ITL Metaflex FCR Article no. 106945 ITL Aerodur Primer S15/90 or 37035a Article no. 102263 ITL or                  106483 ITL or Seevenax 113-22 Article no. 147780 ITL Aerodur Finish C21/100 BAC707 Article no. 104767 ITL or Alexit 406-22 Article no. 114427 ITL PR-1422, Article no. 107632 ITL
Hi Loks, Clip-Nuts, Edge Protections, Sealant Tapes, L-Profiles, Doublers, Nut Plates etc.